Security Display Alarm Stands for Mobile Phone Retail Stores: 2014-10-12

2014年10月15日星期三

security and charging display brackets for all mobile phones

Technical parameter of KM-PA580:

1.Product size: 100*65*150mm

2: Single weight: 240g

3:Main material :ABS/METAL

4.Shell Color: pearl white+black
5.Internal Battery type: 3.7V rechargeable lithium battery.
6.External power adapter: DC5V 1000MA
7.Battery Standby Time: 2 weeks
8.Charge indicator: charging in red , full in green
9.Alarm sound: 105DB.
10.Alarm indication: LED red flashes.

Security function of KM-PA580:

1:Three Contacts disconnection alarm.

2:Short Circuit Alarm Function

3:Remote Start and Disarm the Alarm.

4:Password function,Change the password freely.

Operation of KM-PA580:

1.Clean the display case, then turn on switch on the bottom of Hot security cellphone /mobile phone display holder /stand with charging and alarm host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly)

2.Connect the charger of Hot security cellphone /mobile phone display holder /stand with charging and alarm with the alarm host,the other end into the power socket in preparation for a fixed monthly charge.

3.Tear off the 3 adhesive tapefrom the Anti-Theft Terminal product display and paste exhibit's back fastened

4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product

5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status

6.The installation is set up。

www.holderprotection.com
www.360lonsan.com
www.alarmstand.com

SKYPE:KENSMITH1001

2014年10月14日星期二

popular smart phone security and charging display brackets

Brief introduction:

KM-PA380 is mobile phone display alarm holder designed specially for smart phone,
With mobile phone charging function, inbuilt high decibels alarm. Bicolor indicator light
(working & alarming status), Make your exhibit more secure.

Product Detail:

1. Charge function for diplayed product
2. Enhanced inbuilt alarm buzzer of 85--100db
3. Charge indicator: charging in red, full in green
4. Rechargeable 3.7V Lithium battery inside
5. Alarm function: Low power circuit design;alarm indication: LED red flashes
6. Dual-color alarm indication light
7. Remote infrared control

www.holderprotection.com
www.360lonsan.com
www.alarmstand.com

SKYPE:KENSMITH1001

2014年10月13日星期一

Best selling cell phone security alarm pedestal

Product Description:

Brand Name	Comer
Usage	for phone display safety
Material	ABS
Height	6.8cm
Key words	security display stand
Applicable to	for iphone, sumsung,LG,Blackbattery
Sticker	Woodiness/Marble/Acrylic/Glass displays
Alarm colume	100-120 db
Packing	Export carton
Delivery type	DHL,Fedex,UPS,sea shipmeng(your choice)
Delivery time	5-10 days as soon as receiving the receipt.
Payment	western union,TT, Moneygram,Payple
Product series	display stands for phone, tablet, camera

Product operation:

1 Charge for the host with the adaptor connected (one end of adaptor plunging into DC hole, the other end connecting to power socket) (Led indicator turns red when charging and turns off when fully charged)

2 Slide the switch on the bottom of the holder, turn on power.

3 The decoder aims at the signal receiver hole parallelly, press the decoder within 15mm to write code.

4 Tear off the 3M sticker of the holder bottom.

5 Put the holder on the clean table.(Need to press at least for 10 minutes).

6 Tear off the 3M sticker of the contact touch. then put it on the back of displayed cell phone(need to press at least for 10 minutes)

7 Tear off the 3M sticker of the small touch. then put it on the front side of the displayed cell phone(need to press at least for 10 minutes)

8 The displayed goods cannot be charged unless the holder is being charged.